ASTM D3846 In-Plane Shear Strength of Reinforced Plastics
ASTM D3846 describes the method for determining the in-plane shear strength of reinforced plastic composite materials. These specimens are typically thermosetting plastics with reinforcements that widely vary in type and thickness ranging from 2.54 mm to 6.60 mm.
- Ensuring parallelism of compression platens
- Reporting calculations in compliance with the standard
- Ensuring parallelism of compression platens – When testing according to ASTM D3846, the compression platens must be parallel to each other and in the normal plane to the axial loading. The lockable spherically-seated platens provide a means of pre-loading the assembly and locking the platen to ensure parallelism for the test.
- Reporting calculations in compliance with the standard – In order to calculate the in-plane shear strength, the user must measure the length of the failed area. Bluehill® Universal materials testing software offers a prompted test to walk users through the necessary inputs at each step. An integrated specimen measurement device can be used to automatically input the measurements into Bluehill Universal, saving time and eliminating typos.
It is important to review ASTM D3846-08(2015) in order to fully understand the test setup, procedure, and results requirements.
Bluehill Universal Software is built from the ground-up for touch interaction and an intuitive user experience. Discover simpler and smarter testing with features such as pre-loaded test methods, QuickTest in seconds, enhanced data exporting: and Instron Connect – a new feature that provides a direct communication link to Service. Users of previous versions of software such as Bluehill 2 and Bluehill 3 can easily upgrade to the newest version of Bluehill.
- 2.6 MB
5960 Dual Column Series are versatile universal testing instruments for mid-range testing up to 50 kN. They are commonly used for plastics, metals, rubber materials, automotive components, composites and non-ambient temperature applications.
- 453.8 KB
5900 Universal Testing Systems are engineered for precision, built for durability, and offer the flexibility for changing requirements. They are designed with standard and optional features that increase testing efficiency and improve the testing experience for the operator. A wide range of models are available for testing capacities from < 100N up to 600kN.
- 2.8 MB
Instron® testing systems provide an accurate measurement of force during a test, but in order to produce accurate stress results, you must measure the specimen and get the dimensional data into Bluehill® Universal Software. While digital instruments, such as micrometers, can provide accurate measurements, using them properly takes time and requires the operator to manually enter the dimensional data into the software.
- 0.6 MB