|
|
|
|
Compression Bridge Assembly
|
 print
|
Compression Bridge Assembly
|
|
|
Description:
Compression Bridge Assembly for use on 400HVL and 400WHVL universal testing machines to permit the mounting of compression test fixtures without the removal of the tensile grips and fixtures.
Note: The use of a compression bridge will reduce the available compression opening of the testing machine
unless additional tension and compression space is purchased.
- Permanently installed to motorized crosshead, bridge
removal not required for tensile testing
- Bridge design incorporates a Type R2f receiver for
connection of compression accessories equipped with
the Type R2m ball hitch connection.
- Effective height : 527mm (20.75 in)
- Nominal weight: 200kg (441 lb)
Specifications:
| Pressure Rating | 690 MPa
(100,000 psi) |
| Accessory Height | 527 mm
(20.75 in) |
| Accessory Width | 533 mm
(21 in) |
| Accessory Depth | 279 mm
(11 in) |
| Upper Fitting | 0.53 inch Through Hole |
| Compatible Frame Models | 5596, 400HVL |
|
General photo of a compression bridge attached to a SATEC™ Series 5595-300HVL.
Compression Bridge
A = Accessory height
B = Accessory width
C = Accessory depth
|
|
Related Information
|