What is Torsion Testing?

Torsion testing is a type of mechanical testing that evaluates the properties of materials or devices while under stress from angular displacement. Torsion testing can be split into two distinct categories: testing raw materials like metal wires or plastic tubing to determine properties such as shear strength and modulus, or functional testing of finished products subjected to torsion, such as screws, pharmaceutical bottles, and sheathed cables. The most common mechanical properties measured by torsion testing are modulus of elasticity in shearyield shear strengthultimate shear strengthmodulus of rupture in shear, and ductility.

Why Perform a Torsion Test?

Many products and components are subjected to torsional forces during their operation. Torsion testing is necessary when engineers wish to change or update the materials used in these products. For example, the metal used in vehicle drive trains experiences a complex combined loading when in use, with torsion being the main component.  An engineer trying to design a more fuel-efficient vehicle may need to change the material of the driveshaft in order to reduce vehicle weight. Torsional testing can help the engineer identify an appropriate material that will possess the required torsional strength while also contributing to the goal of lightweighting.

Many finished products are also subjected to torsional forces during their operation. Products such as biomedical tubing, switches, and fasteners are just a few devices subjected to torsional stresses in their everyday use. By testing their products in torsion, manufacturers are able to simulate real life service conditions, check product quality, verify designs, and ensure proper manufacturing techniques.

Torsion Testing

Types of Torsion Tests

Torsion tests can be performed by applying only a rotational motion or by applying both axial (tension or compression) and torsional forces. Types of torsion testing vary from product to product but can usually be classified as failure, proof, or product operation testing.

  • Torsion Only: Applying only torsional loads to the test specimen.
  • Axial-Torsion: Applying both axial (tension or compression) and torsional forces to the test specimen.
  • Failure Testing: Twisting the product, component, or specimen until failure. Failure can be classified as either a physical break or a kink/defect in the specimen.
  • Proof Testing: Applying a torsional load and holding this torque load for a fixed amount of time.
  • Functional Testing: Testing complete assemblies or products such as bottle caps, switches, dial pens, or steering columns to verify that the product performs as expected under torsion loads.

Torsion Testing Equipment

Torsion testing can be performed on any one of several different testing systems depending on the specific application. Some labs prefer a dedicated torsion-only testing system such as Instron's MT MicroTorsion Series, while others may prefer to adapt their existing universal testing machine with a Torsion Add-On 3.0 fixture that enables the system to perform biaxial testing. Functional testing of finished products is often performed on a dynamic fatigue system such as Instron's Electropuls.

Calculating Results

The torque vs rotation curve produced by testing raw materials in torsion is in many ways analogous to the force displacement curve captured during axial testing. Most materials exhibit a similar linear region, representing the shear modulus, followed by yield and ultimate failure.

torsion test stress strain curve

Common Torsion Testing Standards

ASTM F543 - Axial and Torsion Testing of Bone Screws 

ASTM A938 - Torsion Testing of Metallic Wire

ISO 7800 - Torsion Testing of Metallic Wire

ISO 594/ISO 80369 - Testing of Conical Luer Fittings

ISO 7206 - Endurance and Fatigue Testing Artificial Hip Implants