ISO 7886-1 Testing Sterile Hypodermic Syringes
ISO 7886-1 specifies the test conditions for testing the aspiration and injection of fluids using sterile single-use hypodermic syringes. Annex G specifies the conditions for determining the forces required to operate the plunger.
For this test, we used our ISO 7886-1 compliant syringe fixture, which consists of a bottom plunger holder, a top syringe holder, and a reservoir table, and a universal testing system. First, water is extracted from the reservoir that is placed on the syringe test fixture, then the machine is stopped and the direction is reversed applying a compressive force to the syringe, and lastly the fluid is expelled back into the reservoir. Some of the common calculations performed as a result of this test are: the force required to start the movement, the mean force to return the plunger, and the minimum and maximum forces during the return of the plunger.
Since syringes have different physical dimensions, plunger arrangements, and plunger geometries, our syringe fixture is highly adaptable and can accommodate syringes ranging from 5 - 35 mm in diameter. We recommend using Bluehill® Software, equipped with the Test profiler module, to accurately run the test, perform the necessary calculations, and generate a report compliant with ISO 7886-1.
We recommend that you review ISO 7886-1 in its entirety to understand the full requirements prior to performing any testing.
The Syringe Test Fixture is designed to meet the test requirements of ISO 7886-1 Annex G for sterile, single-use hypodermic syringes. It can easily be mounted to most universal testing systems.
- 265.2 KB
5900 Universal Testing Systems are engineered for precision, built for durability, and offer the flexibility for changing requirements. They are designed with standard and optional features that increase testing efficiency and improve the testing experience for the operator. A wide range of models are available for testing capacities from < 100N up to 600kN.
- 6.8 MB
Bluehill Universal Software is built from the ground-up for touch interaction and an intuitive user experience. Discover simpler and smarter testing with features such as pre-loaded test methods, QuickTest in seconds, enhanced data exporting: and Instron Connect – a new feature that provides a direct communication link to Service. Users of previous versions of software such as Bluehill 2 and Bluehill 3 can easily upgrade to the newest version of Bluehill.
- 14.2 MB