Shear

Testing Solutions

ISO 4587 Adhesives Tensile Lap Shear Strength Rigid to Rigid

Bonds between metals, plastics, and composites can be tested in tensile testing machines for the adhesive strength when perpendicular force is applied.

MIL STD 833 Shear Testing of Microelectronics

MIL STD 883 is a test method used in the semiconductor and microelectronics industry to determine the integrity of the connection between a semiconductor die or surface mounted passive elements to package headers or other substrates. This determination is based on the measurement of adhesion force between the die/package and the substrate, and is useful for testing microelectronic components or electronic packages such as IC chips, BGA, QFN, CSPs, and Flip Chips. MIL STD 883 is an ideal method for measuring the shear force required to to initiate failure of glue, solder, and sintered silver bonded areas.

Shear Adhesion Strength Testing Dental Materials and Adhesives

Materials bonded to tooth enamel can be tested with machines like the Electromechanical Testing Machine or Dynamic Test Instrument.

EN12090 - Determination of Shear Behavior of Thermal Insulation Products

Both single and double test arrangement work in compliance of EN12090 to test the shear behavior of thermal insulation products used in buildings.

ISO 14129 In-Plane Shear Stress/Shear Strain Response

The in-plane shear stress/shear strain response can be discovered with the tension test method by the ISO 14129 standards with an Instron 3300 or 5900 machine.

ISO 14130 Determination of Apparent Interlaminar Shear Strength by Short-Beam Method

ISO 14130 uses a short-beam method that can be used with a 3400 or 6800 machine to determine the interlaminar shear strength of fiber-reinforced plastic composites.

NASM 1312-13 Fastener Double Shear Testing

The Industrial Series 300DX Model is suited for double shear testing to NASM 1312-13 for the Aerospace Industries Association.

Process Optimization of Rubber Compounds using Capillary Rheometry Viscosity Measurements

To test the quality of un-vulcanized rubber, use a CEAST SR20 capillary rheometer to measure its behavior at different temperatures, pressures, and shear rates.

Wood Shear Testing

A 3300 Series testing machine with a 50 kN load cell and wood shear fixture can determine the shear strength of wood and adhesives that bond wood layers and parts.